Introduction
Creader VI+ (code reader) is a new automotive fault diagnostic tool that Launch specially designed for DIY user and maintenance personnel of small auto reparin shops. This product has applied color LCD,M user-friendly function menu design, supporting full functions of OBDII& EOBD vehicle and basic diagnostic functions of eight Japanese brands JOBD vehicles, with multi-languages selection and LED diagnostic status indication , which greatly improves the operability of product. It has applied whole new product platform , which makes Creader VI+( code reader) run fast and diagnose more efficient.
Functions
● JOBD basis diagnostic functions
● Read fault code
● Clear fault code
● Read data streams
●OBDII full diagnostic functions
●Read dynamic data streams
●Read pending fault code
●MIL indication
●Read control of on-board systems of components
●Readiness status testing
●Read vehicle information
●Query freeze frame
●Read permanent fault code
●Read current fault code
●Query fault code
●Clear fault code
●Play back test data
●Oxygen sensor detection testing
●On-board monitoring test for specific monitored systems
Specifications
● Screen: 2.8, 262K true color, 320*240 LCD
● Input voltage range : 8-32V
● Operating current : typically <100mA @12V
● Typical power consumption :<1.2W
● Wire connection :standard 16 Pin OBD diagnostic connector
● Environmental temperature: 0℃~50℃
● Storage temperature and humidity: -20 ℃---70℃ @RH 60%
● External dimension: L*W*H = 121*82*26mm
● Single unit:< 500g
Recommended use |
Indoor |
Optimal viewing Distance |
1" to 14" (2.5cm to 35.6cm) with 8.5mm diameter imager head 3/8" to 12" (0.95cm to 30cm) with 5.5mm diameter imager head |
Image capture |
JPG images (640x480) AVI videos (320 x 240) |
Screen type display |
3.5" TFT LCD |
Display resolution |
320 x 240 |
Power supply |
Built-in rechargeable lithium-ion battery pack (3.7V/1640 mAh) |
Tested battery life |
3-4 hours of continuous use |
Dimensions |
199 x 100 x 178mm (7.83" x 3.94" x 7.0") |
Recording medium |
Micro SD card (Micro SD card is optional and not included) |
Imager head |
18.5mm (0.33") is standard and 5.5mm (0.22") is optional. |
Waterproof |
Imager head and cable to 3m (10') |
Additonal ports |
USB, video out (TV-out) port |
Operating temp. |
Main unit: 32°F to 113°F (0°C to 45°C); Cable: 14°F to 176°F (-10°C to 80°C) |
Storage temp. |
-4°F to 158°F (-20°C to 70°C) |
Video output |
RCA |
TV out |
NTSC, PAL |